Classic Scalloped Picket Gate | 3ft x 3ft (85cm x 88cm)

• Fully Pre-Assembled: Arrives built and square for quick installation and a precise fit.
• Hardware Included: Supplied with black-finish hinges and a matching latch for standard single gates (double gates are supplied with a centre bolt pin in place of a latch).
• Zero Maintenance: Will not rot, rust, peel or require painting—simply wash with soap and water.
• Built to Last: Premium PVC vinyl engineered for UK weather resilience and colour stability.
• Perfect Match: Designed to complement our Classic Scalloped Picket panels for a seamless look.
• 30-Year Manufacturer’s Warranty: Long-term peace of mind.

Your gate kit includes everything you need for a standard single-leaf installation.

• 1 × Fully pre-assembled Classic Scalloped Picket gate (3ft × 3ft)
• 2 × Black-finish hinges
• 1 × Matching latch

Note: Posts and post caps are sold separately. Ensure your post selection and spacing suit the gate width and hardware.

• Style: Classic Scalloped Picket
• Gate Width: Fits a 3ft / 36in (≈91cm) opening between posts; supplied gate panel ≈33.5in (≈85cm) wide, allowing ≈2in (5cm) or more total fitting clearance for hinges and latch.
• Gate Height: ≈34.5in (≈88cm)
• Material: Premium PVC Vinyl (white)
• Finish: UV-stabilised, low-gloss, easy-clean surface
• Hardware: 2 × steel hinges (black finish) + matching latch
• Assembly: Supplied pre-assembled
• Maintenance: Wash with mild soap and water
• Warranty: 30-year manufacturer’s warranty

Double gates: two gate panels sized for your opening with ≈2 in (5 cm) total fitting clearance across the hinge sides and centre for the bolt pin/keeper.

Pair your gate with matching components for a consistent, professional result.

Matching Panels:

• Classic Scalloped Picket Fence Panel | 6ft × 3ft

Posts:

• Posts for Scalloped Picket Fencing

Accessories:

• Post Caps & Accessories

Supplied fully pre-assembled for fast, accurate fitting. A competent DIYer or professional installer can complete the installation using the included hinges and latch.

• Step-by-Step Installation Guide
• Installer Directory
• Need tailored advice? Contact our team

Double gates: supplied with a centre bolt pin in place of a latch. Check swing clearance and post anchoring before ordering.

What does "opening between posts" mean?
The inside distance from the inside edge of one gate post to the inside edge of the other, where the gate will sit. Measure around the middle of the gate height.
What is "clearance"?
The planned side gaps so the gate swings freely and hardware fits. On our gates it's ≈10 mm per side (about 3/8").
How do I measure correctly?

1. Measure the inside distance between posts at three heights: top, middle and near the ground.
2. Use the smallest measurement as your opening between posts.
3. Note sizes in both imperial (ft/in) and metric (cm).
4. Allow for ground clearance if the path slopes so the gate bottom won't scrape.

Rule of thumb: The supplied gate is ~2 cm narrower than the opening (≈10 mm clearance each side).